Shows & Demonstrations
Teagle will be present at the following Agricultural Shows and
Demonstrations in 2008:
May |
21st & 22nd |
|
June |
5th, 6th & 7th |
|
| 11th & 12th |
|
| 19th - 22nd |
|
July |
8th, 9th & 10th |
|
| 11th, 12th & 13th |
|
| 21st - 24th |
|
September |
17th & 18th |
|
 808SC Dual Chop - Launched
With the success of the Tomahawk 8080SC Dual Chop Teagle has launched the Tomahawk 808SC Dual Chop.
This is a development of the popular mounted 808 Tomahawk straw shredder which has the added ability that it can chop straw to either short or long lengths at the flick of a switch.
The machine has the additional advantage over the 8080SC Dual Chop Tomahawk in that it is tractor mounted, which makes the machine more manoeuvrable around difficult buildings and easier to reverse into dead end passages.
8080SC Dual Chop - Dual Success at LAMMA 2007
The Tomahawk 8080SC Dual received two major accolades at the LAMMA 2007 at Newark.
The awards were:
The Loven Cup for the best new product or innovation with a retail price greater than £5,000
The Maurice High Trophy for the best new product or innovation at the show.
The newly introduced Tomahawk 8080SC Dual Chop is unique in the market place in that it can chop straw into short lengths for applications such as cubicles or poultry and be spreading virtually unchopped straw into loose housing seconds later. This transformation is carried out using electronic controls located in the tractor cab.
In chopping mode, static knives interact with the rotating cross beater, producing a chop length of typically 25mm. For straw spreading, the knives are withdrawn hydraulically, allowing straw to pass straight from the bale into the discharge rotor.
Engine Driven Flail Mower – EF120
The latest addition to the Teagle stable of ground maintenance machinery is the EF120 engine driven flail mower.
The EF120 has a 120 cm. cutting width and it’s ultra-robust rotor is built to last. The unit is fitted with hammer type flails for durability and a clean cut. It also sports a full width roller to minimise any risk of scalping.
Cutting height adjustment is carried out by a readily accessable turnbuckle to the rear of the cutting head. The machine is carefully balanced to keep the nose weight down to an easily manageable level
The EF150 can be towed behind any quad bike or ATV as long as the forward speed is compatible with the machine’s cutting ability under the prevailing conditions.
TC Models
Due to popular demand the Tomahawk TC versions of bale shredders now have
electrics fitted as standard. This makes the operation of the machine much easier and more efficient.
SC New Chute Design
A new ' SC' (sloping chute) version of each of the box-and-bed-chain Tomahawk models is being introduced for the
coming season. The new version incorporates an inclined swivel giraffe which, together with a feed slide on the right
hand side, will give much greater flexibility than the now discontinued ' S' design and will perform virtually all of the
operations of the TC, but at a lower price.
Main rotors on all models will in future have eight paddles instead of the
current six.
A replacement Out-Front Mower Deck version of the Dynamo Finishing Mower is now available for fitting onto Kubota, New Holland, Iseki, John Deere and MF tractors.
The Dynamo Deck is similar in concept to the 3-point linkage Dynamo, but it is strengthened in critical areas to withstand the rigours of professional out-front mowing.
The lower edge of the skirt is fitted with a reinforcing tube to withstand nudges against trees etc., permitting close cutting without damage.
 Engine Driven
The Dynamo Finishing Mower range is now available in engine driven versions for towing behind quads and 4 wheel drive vehicles.
Cutting widths are 1.2 m., 1.5 m and 1.8 m. with both manual and electric start engines available.
Wheels can be either at the sides of the machine, or to the rear with a castor wheel at the front.
Low drawbar weights are features of both versions.
The enclosed blade chambers around the triple rotors give excellent cut and spreading characteristics.
Optional mulching blades can be fitted for quick dispersal of cuttings.
|
