If I had to change I wouldn’t hesitate to have another one

If I had to change I wouldn’t hesitate to have another one

TBM/S Flail Mower

Peter Hosking runs a contracting business across an area of Cornwall stretching from Newquay to Penzance. Through the year Peter will find himself undertaking a variety of operations from hedgecutting to rotavating, baling or working with flail mulchers behind his Case 125.

Peter runs two Teagle flail mulchers, one a conventional TBM270, and the second, purchased more recently around 2 years ago, a TSB 250 high body mulcher.

Whilst the TBM270 has provided many years of good service, the TSB is now used in most applications because of it’s versatility and high performance.

“Contracting sees the flail mulchers used in a variety of applications from management of grass and set-aside areas with rushes, reeds, brambles and gorse up to 2” diameter to mulching Brassicas” – for which there is a substantial demand in South West Cornwall.

Peter has found that growers for whom he mulches residue crops “reduce the following discing operation from two passes to one, and they do not get as many blockages in the following planting operation, caused by stalks left in the ground.”

Whilst looking for a machine to complement the TBM270, but offer a little more versatility, Teagle suggested to Mr Hosking the TSB 250 model which lends itself well to a variety of applications.

Versatile - The high body means that there is massive capacity for mulching high volumes of material, such as residue from Brassica crops, or heavier set aside areas.

Robust - In addition the massive rotor tube, the long “T” type hammers lend themselves well to a landscape that often has granite close to the surface as they have a long break-back travel and consequently a large clearance between the hood and the rotor.

High Performance – the high rotor speed, and large tip-to-tip diameter of the flails generate a very high tip speed, 70m/s, which is around 50% greater than a conventional flail mulcher. This delivers a fine finish, as well as good mulching performance against the two rows of under hood counter-blades.

Having covered more than 3000 acres over the last 2 years, with only 2 bearings in the roller replaced, Mr Hosking is very pleased with the reliability of the machine – “if I had to change I wouldn’t hesitate to have another one”.

Despite the punishing range of applications the machine is still on it’s original set of flails – Peter notes “with the service from these flails I wouldn’t use anything but original flails from the manufacturer“.

The hydraulic rear hood was selected as this enables the operator to vary the mulching intensity, and so balance forward speed with power requirement and the amount of mulching required.

For example, Peter adds, “For rushes and reeds I drop the hood as the material needs more mulching”

Owners Club

  • Manuals
  • Technical specifications
  • Spare parts listing
  • Plus VIP competitions
Join up today

Book a demo

Please get in touch if you would like a free demonstration of one of our machines.

Email us
Top