A High Capacity Mill for processing dry materials such as straw and miscanthus to a consistently short length for Bedding, Feeding and Biofuel Applications. Calibrate material length from 20mm to 100mm.
Straight forward setting of material output
Quick change screens can be switched at ground level in minutes. The two-part screens are reversible and can be fitted in various combinations to control output of finished product.
Only 1 operator required with Automatic Power Loading
To maximise throughput and prevent overloading, the C12 governs bale chamber rotation automatically. Tractor power loading is controlled remotely from the loader vehicle via Bluetooth®.
Designed for Contractors and Large Scale operators
The C12 is homologated to 40km/hr, incorporating Air/Hydraulic braking combinations. Service intervals are extended with through hardened boron steel Hammers with ARMATECH PLUS® edge facing.
- Capacity - Up to 11t/hr
- Tractor HP - 120-200
- Material output - 20-100mm
Straw is a very useful feed if prepared in the right way.
In dry cow rations it can be used to control energy intake and reduce the risk of milk fever.
In milking cow rations it can be useful as physically effective fibre when required.
"With improved and more consistent straw intakes we are better equipped to control metabolic stress in fresh cows, which can cause issues such as retained placenta and metritis. Getting off to a better start these cows have less negative energy balance and sub-clinical ketosis. Straw rations can also help prevent milk fever."
Andy Hawken AMTRA, DipRN Three Counties Feeds
To find out more about transition cow diet formulation with Three Counties Feeds - click here
PTO Speed | 1000rpm |
Loading Height | 2.37m |
Transport Width | 2.39m |
Transport Length | 5.97m |
Transport Height | 3.20m |
Working Length | 8.74m |
Conveyor Discharge Height | 4.06m |
Bale Chamber Diameter at Base | 2.20m |
Bale Chamber Loading Diameter | 2.20m/3 |
Weight. | 4200kg |
Dual Air / Hydraulic Brakes | Std. |
Name | Description | Link |
---|---|---|
Tomahawk C12 Calibrator | Brochure | Download File |
"Mill offers consistency to reduce sorting in TMR ration."
Tomahawk Mill
Agrocoop Imeľ a.s. have a farm with around 800 high performing cows.
Great care is taken over the preparation of the feed commodities, with a focus on particle consistency to ensure that cows do not sort their ration.
Whilst a vertical auger mixer wagon was being used to process straw, Agrocoop were not achieving the consistent short chop length they wanted in the chopped straw in the ration, and it was taking too long to process the mix.
Feed specialist Marian Stasny of Teagle distributor Merkanta suggested an electric drive Tomahawk 505 Mill, fitted with a 28mm screen and blades.
Fitted with an electric feed conveyor the machine can easily chop a bale to around 25-30mm in around 10 minutes, with up to 8 bales being processed each day. The machine is located outside under a lean-to roof, operating quietly and efficiently, blowing chopped straw on demand directly into the feed commodity bunker.
The electric drive has proven to be an economical choice, with running costs reduced by around 50% compared to a tractor powered model.
Agrocoop, - Slovakia
18/09/2015

C12 Calibrator Bale Processor enquiry form
Please enter the details of your enquiry below and we will respond to you as soon as possible.