Cookies on Teagle

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on the Teagle website. However, if you would like to, you can change your cookie settings at any time.

Centerliner SX C-Tech

The Professionals' Choice

Delivering an exceptional spread pattern every time.

SX C-Tech Series Fertiliser Spreader

Fertiliser Spreaders

SX C Tech Series

 
The Ultimate in Precision
 
The SX C-Tech brings convenient precision farming to the SX models.
The Centronic control system can be integrated with optional Centermatic weigh cells and GPS controlled variable rate systems for absolute accuracy and efficiency.
 
All SX C-Tech models are equipped with the Centronic control system
which automatically adjusts the shutter opening according to the
tractor forward speed (DPAE).

 

Why own a Centerliner SX C-Tech?

Teagle promotes the quadruple overlap distribution system.

This robust spreading pattern is incredibly tolerant to sources of inaccuracy such as wind, variation in fertiliser characteristics and driver error.

Teagle offers a range of fertiliser spreaders that fulfils all European standards relating to accuracy of distribution and border spreading.

The winning combination of the Accu Rate delivery system with a robust quadruple overlap spread pattern results in a spreader that operates reliably and is consistently accurate - even on banks and hillsides.

Accurate distribution

The bowl system delivers fertiliser direct to the spreading vanes to ensure the drop point does not change even when spreading on hillsides.

Accurate dosage

The shutter profile achieves an accurate dose both at low and high rates for fertiliser, slug pellets and grass seed.

Vortex system

Subtle agitation at the base of the bowl sets up a vortex to smoothly spin fertiliser through the shutter without causing damage to the material.

Consistent spread

To ensure the most consistent spread in the field, each piece of ground receives 16 deliveries of fertiliser. Component wear is also reduced as the spreading work is shared between 8 vanes.

    Centronic Control System
    Click to enlarge

    Centronic Control System

    All SX C-Tech models are equipped with the Centronic control system which automatically adjusts the shutter opening according to the tractor forward speed (DPAE).

    AccuRate, Every Time
    Click to enlarge

    AccuRate, Every Time

    1. Resilient accuracy
    The gentle taper of the triangular spread pattern produced by the Centerliner distributes and error across the full width of the bout to minimise the risk of striping.

    2. Consistent Coverage
    Fertiliser is spread to each piece of ground 4 times through the Quadruple Overlap. The Centerliner applies little and often for outstanding coverage.

    3. In-Built Error Offset
    With the Centerliner, a skew in the spread pattern from one disc is typically offset by an equal and opposite effect from the second spreading disc.

    Accurate Dose Rate
    Click to enlarge

    Accurate Dose Rate

    The shutter profile achieves an accurate does both at low and high rates for fertiliser, slug pellets and grass seed.

    Hopper Windows
    Click to enlarge

    Hopper Windows

    Keep an eye on the content of the hopper through the hopper windows.

    Ease of Maintenance
    Click to enlarge

    Ease of Maintenance

    Cleaning and maintenance of the spreading system is straightforward thanks to it's clean lines, simple construction and ease of access.

    Mudguards
    Click to enlarge

    Mudguards

    Robust mudguards keep your Centerliner clean.

    Subtle Agitation
    Click to enlarge

    Subtle Agitation

    Subtle agitation at the base of the bowl sets up a vortex to smoothly spin fertiliser through the shutter without causing damage to the material.

    Stainless Steel Spreading System
    Click to enlarge

    Stainless Steel Spreading System

    For outstanding durability, stainless steel is used extensively in the spreading components which are driven through a low maintenance driveline.

    LED Lighting
    Click to enlarge

    LED Lighting

    LED road lighting kit supplied as standard.

    CenterLift Hydraulic Tilt
    Click to enlarge

    CenterLift Hydraulic Tilt

    Centerliners are supplied with a hydraulic tilt cylinder that can be set up to tilt either to the right or left hand side depending on whether the boundary is spread clockwise or anti-clockwise.

    Easy as 1, 2, 3 - Check - set and go.
    Click to enlarge

    Easy as 1, 2, 3 - Check - set and go.

    1. Check your fertiliser and identify the required Centerliner settings using our comprehensive and straightforward spreading charts.

    2. Set the machine working height, working angle and dose rate.

    3. No nonsense spreading from the name you can trust.

    Hopper Cover
    Click to enlarge

    Hopper Cover

    A robust hopper cover with handles to open, is supplied as standard.

    Spread 12, 18 or 24m with ease
    Click to enlarge

    Spread 12, 18 or 24m with ease

    No need to change vanes, simply switch gear sets when spreading above or below 18m.

  • Centronic Control System

    Centronic Control System

  • AccuRate, Every Time

    AccuRate, Every Time

  • Accurate Dose Rate

    Accurate Dose Rate

  • Hopper Windows

    Hopper Windows

  • Ease of Maintenance

    Ease of Maintenance

  • Mudguards

    Mudguards

  • Subtle Agitation

    Subtle Agitation

  • Stainless Steel Spreading System

    Stainless Steel Spreading System

  • LED Lighting

    LED Lighting

  • CenterLift Hydraulic Tilt

    CenterLift Hydraulic Tilt

  • Easy as 1, 2, 3 - Check - set and go.

    Easy as 1, 2, 3 - Check - set and go.

  • Hopper Cover

    Hopper Cover

  • Spread 12, 18 or 24m with ease

    Spread 12, 18 or 24m with ease

SX C-Tech 2500 SX C-Tech 3000 SX C-Tech 4000 SX C-Tech5000 SX C-Tech 6000
Working Width 6-24m 6-24m 6-24m 6-24m 6-24m
Controls Electric Electric Electric Electric Electric
Capacity (Ltr.) 1580 1900 2360 2730 3150
Loading Height 1.17 1.25m 1.31m 1.4m 1.51m
Width 2.54 2.54m 2.75m 2.75m 2.75m
Length 1.64 1.64m 1.70m 1.7m 1.7m
Unladen Weight 440kg 455kg 465kg 510kg 540kg
Mudguards Standard Standard Standard Standard Standard
Rear Light Kit Standard Standard Standard Standard Standard
Weight Cells Optional Optional Optional Optional Optional
Bout Width Up to 24m Up to 24m Up to 24m Up to 24m Up to 24m
Name Description Link
Centerliner Range Brochure Download File
If you would like to download an Operators Manual or Parts Book for this machine please click here.
    Calibration Bowl
    Click to enlarge

    Calibration Bowl

    The Calibration Bowl, for double checking the best setting if selected for your machine.

    Punched Hole Sieve
    Click to enlarge

    Punched Hole Sieve

    The Punched Hole, finer than the standard sieve to prevent lumps of fertiliser passing through.

    Grass Seed Agitator
    Click to enlarge

    Grass Seed Agitator

    For spreading grass seed the optional Grass Seed Agitator helps the seed to flow better, without bridging.

    Weigh Cells
    Click to enlarge

    Weigh Cells

    Remove the need for calibration or manual rate setting. Achieve ultimate accuracy irrespective of fertiliser type. Simply enter the desired bout width and application rate to the Centermatic system and the spreader will automatically calibrate output on the move.

    Hardened Vanes
    Click to enlarge

    Hardened Vanes

    For a longer service life Domex Hardened Vanes are available.

  • Calibration Bowl

    Calibration Bowl

  • Punched Hole Sieve

    Punched Hole Sieve

  • Grass Seed Agitator

    Grass Seed Agitator

  • Weigh Cells

    Weigh Cells

  • Hardened Vanes

    Hardened Vanes

"The quadruple overlap pattern spreads fertilisers to 24m without any striping, even when conditions are not ideal."

Centerliner SX C-Tech 4000

Nigel Sheers runs a contract Spraying and Fertiliser Spreading business just outside Leominster, Herefordshire. Each year Nigel spreads around 5000 acres with his SX C-Tech 4000 working at a 24m bout width.

Nigel has run Centerliners for over 20 years, recently upgrading his fourth Centerliner to a CTech model with on-board GPS measuring forward speed. Nigel says that ‘when moving the machine from tractor to tractor this provides flexibility and accuracy as I know that this system will give me the correct reading’.

And why has Nigel stuck with the Centerliner? 

“I can cover a lot of ground, usually travelling at 10mph and covering around 300 acres/day.”

“The quadruple overlap pattern spreads prilled, granular and urea fertilisers to 24m without any striping, even when conditions are not ideal.”

“It is simple to use – whether using the SX or CTech model, with the spread charts and shaker box it is easy to find the correct spreader settings. Adjustment of working width is straightforward with no vanes to change. Headland spreading with a tilt system is simple, and the tilt can be set up for either left or right hand sides.”

And regarding servicing?

Nigel says that “it is simple to maintain as there is not really much to go wrong”.

Nigel chooses the Domex Hardened Vanes for the Centerliner and typically changes them every 2 years as ,”the hardened vanes are more cost effective”.

Nigel Sheers, Contractor - Leominster, Herefordshire

23/08/2013

SX C-Tech Series enquiry form

Please enter the details of your enquiry below and we will respond to you as soon as possible.

Thank you for your interest in our company.

Teagle Machinery will collect the information you have provided to us for the purpose of processing your request.

For more information please see our Privacy Policy