Cookies on Teagle

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on the Teagle website. However, if you would like to, you can change your cookie settings at any time.

X-Pro Flail Mower

Top of the class of front/rear mount mulchers.

Suitable for land reclamation and highway maintenance

X-Pro Flail Mower

Flail Mowers & Mulchers

Overview

  • Available in five cut widths from 2.0m, 2.3m, 2.5m, 2.85m to 3.00m
  • Suitable for mulching grassland, set-aside, heavy undergrowth and material up to 10cm
  • From 100HP to 250HP / Category 2 and 3 linkage 
  • PTO speed 1000 rpm (540rpm on request) 
  • Can be mounted either in-front or behind tractor
  • Hydraulic side shift to offset machine

Outstanding Build Quality and Performance

  • All models are shot blasted and have a high quality paint finish. 
  • Rotor lifts fallen material and mulches to leave a fine finish.
  • Click here for more information about the benefits of the Teagle Flail Mower range.

Features for Reliability and Ease of Use

  • Teagle Flail Mowers and Mulchers have a range of features to ensure ease of operation and straightforward maintenance for a long and trouble-free service life.
  • Click here for details.

Why own a Teagle Flail Mower?

For results in the field there are no compromises.

Whether maintaining amenity areas, topping pasture or managing set-aside you can be sure that in one pass material is: 

  • Effectively lifted and cut - leave the field knowing that wheel marks and other fallen plants will not spring back.
  • Thoroughly mulched - to ensure fast breakdown of material and release of nutrients back to the soil.

Three Key features at the heart of the machine

1. High Rotor Speed

  • ​Rotor speeds in the Teagle range are amongst the highest in their class. This improves the ability to pick up fallen material, and subsequently mulch against counter blades under the machine body. 

2. Heavy duty Hammer Flails

  • ​A clean cut, even in heavy work - All models are fitted as standard with wide flails that typically weigh up to 30% more than the competition.
  • The angle of the cutting face ensures that material is lifted and cut cleanly from the ground.
  • When a foreign object comes into contact with the flail, the flail has a rear profile designed to fold back against the rotor tube without breaking either the heavy duty flail shank or flail bolt. 

3. Roller positioning

  • The height adjustable rear roller is positioned close to the rotor which gives the following benefits:
  • The rear roller is cleaned by the movement of the flails
  • Scalping is reduced because the roller follows contours in the ground closer to the rotor
  • Flow of cut material can be controlled:
  1. When rear deflector is lifted, material passes freely over the roller and is not compacted into the ground.
  2. When the rear deflector is lowered material is held within the mower hood for longer for more intensive mulching.

    Large Diameter Rotor
    Click to enlarge

    Large Diameter Rotor

    Flail tip speeds in the Teagle range are amongst the highest in their class.

    To maximise the flail tip to tip diameter without compromising the strength of the machine, a large diameter rotor is fitted with short flail lugs to reduce the likelihood of them being sheared from the rotor.

    Flail pivot bolts pass through heavy steel lugs welded to the rotor tube. Bolt heads are square for good retention when changing flails.

    Heavy Duty Flails
    Click to enlarge

    Heavy Duty Flails

    The massive 2.2kg 'M' type flails fitted to the X-Pro range generate a powerful updraft to lift fallen material.

    The angle of the cutting face ensures that material is lifted and cut cleanly from the ground.

    When a foreign object comes into contact with the flail, the flail has a rear profile designed to fold back against the rotor tube without breaking either the heavy duty flail shank or flail bolt.

    Heavy Duty Rotor Bearing Carrier
    Click to enlarge

    Heavy Duty Rotor Bearing Carrier

    Robust Body with Counter Blades
    Click to enlarge

    Robust Body with Counter Blades

    The mulcher body is double skinned with a 'Domex' inner hood, so that it retains it's strength even when solid objects such as stones impact the inner skin from underneath.

    Two sets of counter blades are fitted underneath the hood to greatly increase mulching effectiveness.

    The upper set of blades which do most work are bolted to the body for ease of maintenance.

    Roller Height Adjustment
    Click to enlarge

    Roller Height Adjustment

    The large diameter roller is adjustable to suit cutting height requirements.

    Bearings are set into the roller and are easily greased via shielded grease nipples. The risk of dust and debris ingress into the bearings is minimised by a labyrinth arrangement between the roller mounting brackets and the roller itself.

    Adjustable Rear Hood
    Click to enlarge

    Adjustable Rear Hood

    The rear hood is adjustable to vary mulching intensity and can be fully opened for straightforward access to flails.

    A rubber flap deflects debris thrown up by the flails back to the ground.

    Straightforward maintenance
    Click to enlarge

    Straightforward maintenance

    Routine maintenance is straightforward with greasing points readily accessible and protected from damage whist the machine is operating.

    Headstock and Hydraulic Offset
    Click to enlarge

    Headstock and Hydraulic Offset

    The robust front/rear mount headstock runs on greaseable rolled steel profiles at the front and rear of the mulcher.

    A hydraulic ram is fitted as standard to the X-Pro range for straightforward offsetting of the machine.

    Heavy Duty Gearbox
    Click to enlarge

    Heavy Duty Gearbox

    The X-Pro range is fitted with a high quality heavy duty gearbox, proven to operate reliably, day-in day-out.

    The gearbox has a built-in overrun clutch and an output shaft housing that has it's own lubrication system so that the outer bearing never runs dry on hillside work.

    Debris Protection
    Click to enlarge

    Debris Protection

    Chains are fitted to the front of the machine to minimise the risk of heavy debris being thrown forwards.

    A second level of protection is fitted to the X-Pro, with a rubber strip mounted in front of the chains.

    Belt Drive System
    Click to enlarge

    Belt Drive System

    The heavy duty auto belt tensioning drive system provides drivelive protection and reliably transmits the high torque typically required in set-aside and heavy mulching applications.

    Hardox Skids
    Click to enlarge

    Hardox Skids

    Heavy gauge skids protect the machine and minimise the risk of scalping.

    Adjustable Scraper
    Click to enlarge

    Adjustable Scraper

    The X-Pro is supplied as standard with a roller scraper, which is adjustable to keep the roller clean under wet conditions.

    High Quality Walterscheid PTO Shaft
    Click to enlarge

    High Quality Walterscheid PTO Shaft

    All Teagle flail mowers are supplied with a Walterscheid PTO shaft as standard.

  • Large Diameter Rotor

    Large Diameter Rotor

  • Heavy Duty Flails

    Heavy Duty Flails

  • Heavy Duty Rotor Bearing Carrier

    Heavy Duty Rotor Bearing Carrier

  • Robust Body with Counter Blades

    Robust Body with Counter Blades

  • Roller Height Adjustment

    Roller Height Adjustment

  • Adjustable Rear Hood

    Adjustable Rear Hood

  • Straightforward maintenance

    Straightforward maintenance

  • Headstock and Hydraulic Offset

    Headstock and Hydraulic Offset

  • Heavy Duty Gearbox

    Heavy Duty Gearbox

  • Debris Protection

    Debris Protection

  • Belt Drive System

    Belt Drive System

  • Hardox Skids

    Hardox Skids

  • Adjustable Scraper

    Adjustable Scraper

  • High Quality Walterscheid PTO Shaft

    High Quality Walterscheid PTO Shaft

200 230 250 285 300
Number of drive belts 5 5 5 5 5
Width 2.2m 2.5m 2.7m 3.05m 3.2m
Length 1.37m 1.37m 1.37m 1.37m 1.37m
Weight 1250kg 1310kg 1380kg 1465kg 1535kg
Number of Flails 18 20 22 26 28
Application Agricultural / Contracting Agricultural / Contracting Agricultural / Contracting Agricultural / Contracting Agricultural / Contracting
Vehicle Tractor Tractor Tractor Tractor Tractor
Mounting Position Front / Rear Front / Rear Front / Rear Front / Rear Front / Rear
Name Description Link
If you would like to download an Operators Manual or Parts Book for this machine please click here.

X-Pro Flail Mower enquiry form

Please enter the details of your enquiry below and we will respond to you as soon as possible.

Thank you for your interest in our company.

Teagle Machinery will collect the information you have provided to us for the purpose of processing your request.

For more information please see our Privacy Policy