Cookies on Teagle

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on the Teagle website. However, if you would like to, you can change your cookie settings at any time.

Pasture Topper 6 & 8

Robust, Reliable, British Built Quality.

Suitable for Agricultural pasture, Playing Fields, Leisure areas and Amenity applications.

Belt Driven Pasture Toppers

Grassland

Outstanding Performance

British Built Quality

  • Our Toppers incorporate high strength pressings and an impressive driveline and blade system resulting in a very robust machine.
  • All machines built at our factory in Cornwall are now Shot Blasted and finished with Powder Coat paint for outstanding durability.

Overview

  • Available in two cut widths; 
    • Topper 6 : 1.83m (6')
    • Topper 8 : 2.44m (8')
  • Tractor Linkage;
    • Topper 6 -  Cat. 1 & 2 linkage
    • Topper 8  - Cat 2 linkage

Rejuvinate your pastures and control weeds

Reinvigorate productive  growth

  • Whilst we would like grass to thrive and produce as much plant matter as possible in grazing pastures, we do not want it to go to seed. When this happens, the plant directs it’s energy away from producing the leaf towards growth of the stem and seed itself. This can happen when grass gets away from stock, or more commonly, through patchy grazing.
  • Pasture that is going to seed can be recovered and growth reinvigorated by one pass with a Pasture Topper.

Management of Weeds

  • By topping weeds prior to them going to seed their spread can be partially controlled, in particular in organic farming situations or on any farm where agrochemical use may be restricted.

 

 

"Teagle Pasture Toppers offer an economical approach to getting the most from your grazing areas."

 

 

 

 

 

 

 

    Attention to detail
    Click to enlarge

    Attention to detail

    Hardened spring steel blades pivot on hardened bushes. The blades are cranked to reduce the possibility of stone damage, and to lift the grass as it is cut. The tempered spring steel blade holders provide yet further protection against hidden objects.

    Driveline protection
    Click to enlarge

    Driveline protection

    A shearbolt is fitted to the PTO shaft for extra protection.

    Sliding headstock
    Click to enlarge

    Sliding headstock

    Offsetting the machine is carried out without the use of tools. When offset the PTO shaft operates in a straight line for extended life, and only one tractor wheel runs on the uncut material. The rotor cutting the wheel mark is positioned and rotates in the correct direction to lift the grass to leave a clean finish.

    Belt Drive
    Click to enlarge

    Belt Drive

    Rotor drive is through a heavy duty bevel gearbox, direct to one rotor and through a 'V' belt to the other rotor(s). The belt is tensioned via a large diameter idler pulley using a screw.

    Height Control
    Click to enlarge

    Height Control

    Cut height is adjusted with ease from 12mm to 100mm by means of coach bolts at the ends of each skid. Simply undo the bolts, reposition the skids and re-tighten.

    Spreads cut material
    Click to enlarge

    Spreads cut material

    Carefully positioned dividers and deflectors underneath the machine ensure an even spread of cut material. This is further assisted by the turbulence created by the blade design. Rotors overlap to ensure effective cutting across the entire width of the mower.

    Pivoting Headstock
    Click to enlarge

    Pivoting Headstock

    A pivoting headstock allows the machine to follow the contours without putting excessive strain on the machine or linkage.

  • Attention to detail

    Attention to detail

  • Driveline protection

    Driveline protection

  • Sliding headstock

    Sliding headstock

  • Belt Drive

    Belt Drive

  • Height Control

    Height Control

  • Spreads cut material

    Spreads cut material

  • Pivoting Headstock

    Pivoting Headstock

Pasture Topper 6 & 8

6 8
Implement Linkage Cat. 1 & 2 Cat. 2
Working Width 1.8m 2.4m
Length Overall 6' (1.83m) 6'11" (2.1m)
Cutting Width 6'0" (1.83m) 8'0" (2.13m)
Overall Width 6'5" (1.96m) 8'4" (2.54m)
Cutting Height 1/2" - 4" (12mm - 100mm) 1/2" - 4" (12mm - 100mm)
Weight 310kg (668lb) 405kg (890lb)
PTO power required 25HP 45HP
Offset Semi-Offset Semi-Offset
Application Pasture Topping Pasture Topping
Mounting Position Rear Rear
Name Description Link
Topper 6 and 8 Brochure Download File
If you would like to download an Operators Manual or Parts Book for this machine please click here.
    Overrun PTO shaft
    Click to enlarge

    Overrun PTO shaft

    The optional overrun PTO is recommended when the machine is fitted to a tractor with either a braked or 'live' PTO.

    Hydraulic Offset Kit
    Click to enlarge

    Hydraulic Offset Kit

    A hydraulic ram is available as an option for easier offsetting in the field.

  • Overrun PTO shaft

    Overrun PTO shaft

  • Hydraulic Offset Kit

    Hydraulic Offset Kit

Belt Driven Pasture Toppers enquiry form

Please enter the details of your enquiry below and we will respond to you as soon as possible.

Thank you for your interest in our company.

Teagle Machinery will collect the information you have provided to us for the purpose of processing your request.

For more information please see our Privacy Policy